|
EUROVAC
Central
Vacuum Cleaning Systems
|
Eurovac has
tough industrial grade high vacuum systems. Eurovac pioneered Central
Vacuum systems for use with source capture tools over 15 years ago.
They have installed thousands of systems throughout North America.
Dust
Extraction
Eurovac pioneered
dust extraction systems for use with vacuum assist tools with the introduction
of the Eurovac Mark I in 1984.
- A low cost solution
to sanding and grinding dust problems
- A properly installed
Eurovac System virtually eliminates sanding dust.
- Costs are reduced
because sandpaper and discs last up to 40% longer.
- Cuts cleanup
costs and increases production
Fume
Extraction
Eurovac has a complete
range of central high vacuum fume extraction systems ranging form 5HP
to 75HP units which will handle 2 to 35 technicians.
- Captures dangerous
welding fumes before they enter the welder's breathing zone
- Ideal for mig,
tig, arc and robotic welding.
- No lost production
time moving large fume extraction arms every time the welder changes
position
- Source capture
welding guns or welding attachments only require 80 CFM or less each;
eliminating the need for costly air make up systems required with
high volume systems
|
|
EUROVAC I - 2 man to 5 man systems. Available with 5 and
10 HP regenerative blowers
|
Reliable, maintenance free, powerful turbine pump. Heavy duty cast
iron turbine pump and "squirrel cage" type motor are designed
to run continuously all day... every day.
The overall efficient design and built-in sound deadening system result
in extremely quiet operation
Cyclonic filtration removes 99% of dust before the secondary filter.
Features:
- Airlines can be run down to Work
Stations and vacuum hoses are fitted with air lines attached to them
- Work stations can be equipped with
micro-switches
- An optional vinyl coated metal cabinet
is available for sound attenuation
- The system can be used to extract
dust from many other tolls including routers, trimmers, miter saws
and grinders
Specifications
- Horsepower: 5, 6.7, 10, 15, 20
- Line voltage: 208-240, 460 and 575 volts, 3 phase,
60 hertz
- Control voltage: 24 volts, 1 phase, 60 hertz
|
|
Eurovac III is designed for demanding
Industrial dust control. It is ideal for plants and body shops with
10 or more technicians working simultaneously.
Double Workstation with coaxial hose and orbital sander
|
The Eurovac III system utilizes centrifugal multistage pumps which
are available from 10 HP to 100 HP, and are capable of producing
from 300 CFM to more than 5000 CFM at vacuum levels of
5" to 12" Hg.
For situations where water needs to be picked up by the dust extraction
system, Eurovac has a range of wet collection pre-separators available.
And for use with explosive materials such as aluminum dust, wet mix
separators are available.
Tubing
Uses 2" to 12" graduated 14 to 16 gauge steel tubing, long
radius bends and joins with tubing and are secured with heat shrink
sleeves. The system is graduated to maintain air flow at approx. 4500
cubic feet per minutes.
Drops
Available in single or double wall mount or 2" hanging hose drops.
Air line assemblies are available for sanding systems to bring air to
the inlets so its easy for the worker to plug both the vacuum and the
air line at the same time.
Hoses
1" or 1 1/4" vacuum hoses with integrated air lines hoses
do not feel very different than just one hose. Eurovac tries to keep
the hose as small as possible to reduce drag. Swivel cuffs are used
to eliminate hose "fighting" the tool.
|
